104793.45USD
85.38USD
2.17USD
0.17USD
2531.32USD
16.58USD
644.5USD
147.44USD
0.33USD
0.07USD
0.22USD
Post Q&A
HashBoard PSU Control board Overclock Downclock Liquid cooling Mine construction Operation and maintenance
According to the provided image, why does the machine disappear from scanning after running for two days?
@BTC-Miner
2023-07-08 09:40
703
0
0
What could be the issue if the S9K DC-DC output for headphones is too high at 10.8V, while it should be normal at 10.2V?
@BTC-Miner
2023-07-08 09:38
572
0
0
T9+ board 12V is abnormal, clamp points lower than 2.8V.
@Ada
2023-07-08 09:37
587
0
0
On the S9i machine test, is there a significant number of chips but insufficient hashrate?
@BTC-Miner
2023-07-08 09:37
550
0
0
Is there a lack of hashrate when running the entire system，How to solve the issue？
@BTC-Miner
2023-07-08 09:35
556
0
0
S9 hashboard can get 12V and domain voltage 9V when data cable unplug, but no 9V when plug in
@Ada
2023-07-08 09:17
555
0
0
The test shows garbled characters, how to solve it?
@BTC-Miner
2023-07-08 09:14
550
0
0
S9K control board issue,C43 control board SD card flashing fail
@Ada
2023-07-08 08:49
694
0
0
L3+ single-board teste-- temperature error
@Ada
2023-07-08 08:44
663
0
0
After flashing the PIC on the T17 hashboard, the machine is unable to run the hashrate. What could be the issue?
@Ada
2023-07-08 08:23
518
0
0
S9i hashboard, sometimes pass the single-board test, sometimes report 0.
@Ada
2023-07-08 08:17
539
0
0
S9 hashboard single -board test resulted a long string of code, the device hashrate dropped.
@Ada
2023-07-08 08:09
550
0
0
If the hashrate drops on Chain 0 and Chain 3 after running for a while. What's the problem?
@Ada
2023-07-08 08:02
536
0
0
The test report of S9 hashboard abnormal
@Ada
2023-07-08 07:49
555
0
0
S9 hashboard RI is normal from chip 63 to chip 1,short CO at chip 1,but report 0
@Ada
2023-07-08 07:42
525
0
0
The S9 control board top surface only 1 light on.
@Ada
2023-07-08 07:34
538
0
0
How to determine which voltage domain is normal when the L3+ hashboard has voltage domain imbalance?
@Ada
2023-07-08 07:30
528
0
0
Z11 hashboard is short-circuited to ground at 3.3V. After removing the IC (U3), inductor (L1) and capacitors (20, 22, 23, 24), the short circuit issue persists.
@Ada
2023-07-08 07:14
601
0
0
S9 hashboard report 0, No RI signal, replace chip 62 and chip 63, power on but still no signals.
@Ada
2023-07-08 07:02
560
0
0
Z11 hashboard LDO without 3.3V, Pin 1 with 12V input voltage.
@Ada
2023-07-08 06:59
604
0
0
PgUp...34567PgDn
Active Users
@Ada
43 participate in
@Sunny Anusi
37 participate in
@Yoda
34 participate in
@BTC-Miner
18 participate in
@Bogard
3 participate in
@jread352
2 participate in

No. 199, Zhaojuesi South Rd, Chenghua District, Chengdu, Sichuan, China

No.14, Jian'an Rd, Bao An District, ShenZhen, GuangDong, China

+86 15390421113

minerfixesofficial@gmail.com

About Us Contact Us FAQ News
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved